LB-MI-B3 Medium Intensity LED aviation obstruction light

The LB-MI-B3 Medium Intensity LED aviation obstruction light is used to mark structures hazardous to aircraft, complying with CAAC, ICAO, and FAA standards. It is suitable for obstacles with heights greater than 45 meters and less than 105 meters. Equipped with a surge protection device (±6kV/±3kV), it is salt-resistant and corrosion-resistant. The reflector bowl design ensures high light utilization efficiency, making it an ideal choice for high-salinity areas and regions prone to extreme weather conditions.

LB-MI-B3 Medium Intensity LED aviation obstruction light-Specifications

• Name: Medium Intensity LED aviation obstruction light
• Model NO.: LB-MI-B3
• Brand name: lubaosolar
• Effective Intensity: >2000 cd (Night)
• Beam Angle: Horizontal 360°, Vertical ≥3°
• Flash Frequency: Default 20 FPM, customizable to 30 FPM, 40 FPM, 60 FPM, or others
• Light Source Lifespan: ≥100,000 hours
• Light Control Threshold: <50 cd/m² (Night)
• Color: LED - Red, Housing - Yellow Aluminum Alloy
• Rated Voltage: AC 220V (Single-Phase), other voltages customizable
• Average Power: <2 W at 20 FPM
• Lightning Surge: IEC61000-4-5 L-N ±3kV, IEC61000-4-5 L-PE ±6kV, IEC61000-4-5 N-PE ±6kV
• Operating Temperature: -40℃ to 55℃
• Operating Humidity: 0% to 95% RH (Non-Condensing)
• Wind Resistance: ≤240 km/h
• Waterproof: IP65
• Customizable Features: Fault Alarm, Night Vision Goggle Compatible LED, Synchronized Control and Monitoring, IOT Remote Control
• Comes with a 1m cable (customizable)

LB-MI-B3 Medium Intensity LED aviation obstruction light-Size

LB-MI-B3 Medium Intensity LED aviation obstruction light-Factory Production

  

LB-MI-B3 Medium Intensity LED aviation obstruction light-Installation

• Please install the aviation obstruction light horizontally on a plane with sufficient strength. Custom mounting brackets are available based on specific requirements.
• Before wiring, ensure that the power supply voltage matches the rated voltage of the aviation obstruction light
• Correctly connect the live wire (L), neutral wire (N), and ground wire (E/G/PE) according to the labels on the cables.
• After wiring, verify all connections are correct before powering on.
• It is recommended to use a 3-core waterproof cable with a cross-sectional area of 2.5 mm² for connections between the aviation obstruction light and the power supply device.

LB-MI-B3 Medium Intensity LED aviation obstruction light-Wiring Configuration

LB-MI-B3 Medium Intensity LED aviation obstruction light-Precautions

• Aviation obstruction light will experience a temperature rise during operation, which is normal.
• Components of medium-intensity aviation obstruction lights, such as the lens and housing, are made of PC (polycarbonate) material. They must not come into direct or indirect contact with industrial alcohol, thinner, isopropanol, carbon tetrachloride, cyclohexanone, or other organic solvents, as these may cause corrosion and cracking.
• Do not open any part of the light during operation to avoid potential hazards.
• Aviation obstruction light are sealed units. Unauthorized disassembly by non-professional personnel is strictly prohibited. Any tampering will void the manufacturer's warranty and maintenance support.
• Avoid looking directly at the aviation obstruction light horizontally while it is operating to prevent eye damage.