LB-HI-A50 Tower lights aviation obstruction light

The LB-HI-A50 is a high intensity tower lights aviation obstruction light used to mark obstacles that pose a hazard to aircraft. It emits red flashes at night and white flashes during the day. The self-designed reflector converges the beam to concentrate the light, thereby achieving higher intensity, while meeting the applicable standards of ICAO.

LB-HI-A50 Tower lights aviation obstruction light-Specifications

 

• Name: Tower lights aviation obstruction light
• Model NO.: LB-HI-A50
• Brand name: lubaosolar
• Beam Angle: Horizontal 360°, Vertical 3-7°
• Available Colors: Red and white
• Intensity(cd): ≥200,000cd (Daytime), ≥20,000cd (Twilight), ≥2,000cd (Night)
• Operation Mode: 24 hours operation, 3 different modes
• Flash Characteristics: 20-60FPM (40fpm factory setting, others optional)
• Operating Voltage: DC(48VDC) or AC(110-240V) or others
• Instant Power: 2000W
• Average Power: <40W (40fpm)
• Material: Body-Polycarbonate, base-Powder coated Die-casting aluminum
• Wind Speed: 80m/s
• Waterproof: IP66
• Compliance: ICAO Annex 14 Volume 1, 'Aerodrome Design and Operations’ Eight edition 2018, table 6.3, High-intensity Type A White Obstacle Light
• Optional: NVG (Night Vision Goggles) compatible LED, Dry Contact alarm(NO COM NC), User adjustable flashing rate (20, 30, 40, 60), Solar power system

LB-HI-A50 Tower lights aviation obstruction light-Size and Wiring Configuration

LB-HI-A50 Tower lights aviation obstruction light-Installation

• Please install the aviation obstruction light horizontally. Ensure that the installation location is strong enough to support the light, and that the mounting bracket is customized according to the installation site.
• During installation, please DO NOT point the photocell toward any nearby light source, and ensure that the photocell is not affected by nearby objects.
• Before wiring, please confirm that the power supply voltage matches the lamp's input voltage. Connect the power cable correctly according to the corresponding label on the cable.
• After connecting the wires, verify that the wiring is correct before turning on the power. Once the power is turned on, the aviation obstruction light will begin operating normally.
• Please test the GPS synchronization function in an open outdoor area. Synchronization takes approximately 1–10 minutes. (Only applicable to models with GPS synchronization.)
• If the light will be installed indoors, please let us know before ordering.

LB-HI-A50 Tower lights aviation obstruction light-Precautions

• This is a high-power aviation obstruction light. Its surface temperature is high. Do not cover the light, and maintain a minimum distance of ？ 3 meters between the light and any illuminated object to avoid burns or fire.
• Please ensure that the power supply voltage matches the voltage indicated on the label before use.
• It is normal for this product to experience a temperature rise during operation.
• Do not open any part of the lamp body while the product is operating, as this may cause danger.
• This product has a sealed structure. Non-professional maintenance personnel should not disassemble it. If unauthorized disassembly is found, our company will not honor the warranty.
• Do not look directly at the lamp horizontally while the product is operating, as this may cause eye injury.