Model No: Solar energy intelligent pedestrian safety warning system at zebra crossing

Solar energy intelligent pedestrian safety warning system at zebra crossing

The solar energy intelligent pedestrian safety warning system has a new system that can recognize when the human crossing the zebra road which by the camera monitoring and detecting ,and in the same time , passing the signal to the controller centering , and start the crossing warning system. The Solar road stud in the zebra starting working in strobe flashing., the Pedestrian led traffic sign also start flashing in working , which are give the coming vehicle driver warning attention the the crossing way , and waiting the pedestrains people crossing first . And can be controlled and monitoring by cloudy system .
Quantity :
Contact Now

It is designed with five characteristics, such as"energy saving","artificial intelligence", 

"wireless communication","driver warning"and"pedestrian safety", to provide a higher degree of 

protection when pedestrians cross the zebra crossing.

In order to improve the pedestrian's ability to cross the road within the safe range, the solar pedestrian safety system is fixed on

the zebra crossing, and two solar signs are fixed on the side of the road and in the middle of the street to warn the vehicles from

a long distance before reaching the crosswalk.

Product information:

1. High-definition cameras
Through artificial intelligence AI technology, when the pedestrian crosses the lane, the system captures

the pedestrian waiting to cross through the intelligent system through the image taken by the camera. 

The AI analyzes and sends the signal to the system, and lights up together with the solar energy 

intelligent road stud at the zebra crossing to warn.

Camera 12V 700mA

2. Control box

Waterproof IP57,12V

Solar panel:18V 50w single-crystal silicon

Lithium battery:12v 18AH

Charging during the day, 24-hour automatic work

Full charge for 15 hours, support 48 hours of continuous work.

The camera is connected with the control box, and when a detection information is obtained,

the control box sends the signal to the solar road sign, and the solar spike starts to work. 

3. Solar traffic signs

Light source:5mm led band + 12mm reflector
Reflective tape: 3M EGP tape
Single full charge time: 36 hours
Can support about 60 hours of working time, daytime charging, 24 hours of automatic work
Working mode: yellow LED flashes once per second, white LED flashes once per second, 

two colors flash three times per second.

4. Solar road stud

LS-68 solar smart zebra crosswalk road stud

Size: 145*5cm in diameter (5+44.5)

Weight: 1000g+30g

Material: Aluminum alloy+PC

Light source: bright yellow

Double sides 4LED

Working input voltage: 5V

Solar panel: 5.5V 0.8W, SunPower brand in the United States

Rechargeable battery: lithium iron phosphate 3.2V 1500mAh battery

Waterproof: IP68

Working mode: charging during the day, lights on at night.

Advantage

High visibility, visible distance, more than 500 meters
Large luminous Angle, in line with the vehicle driver warning perspective
Embedded buried design, the height of the ground is 5MM (LS-68), anti-skid design, 

anti-sledge design (the height of the sledge is 10MM)

SunPower photovoltaic panels, charging conversion rate is high, up to more than 25%
Strong compression resistance, LS-68 can resist 50 tons of pressure, 80KM/H of the impact of large trucks
Low temperature resistance and high temperature resistance: -20℃~80℃
Long life span, up to more than three years
Meet EU standard EN1463-3
Easy to install, use 152MM diameter drill bit to open a hole about 5CM deep, 

with positioning design, and then pour 2MM thickness of glue
Easy maintenance, embedded design and full IP68 waterproof inner core, 

can not damage the ground, can be removed to complete the replacement

LS-68 real case

Smart zebra crossing system, Solar energy intelligent pedestrian safety warning system at zebra crossing