Wireless warning system for traffic lights

Intelligent zebra crossing traffic signal warning system, in order to ensure the safety of pedestrians

crossing the street, this system helps to increase the judgment of motor vehicles for the road

conditions ahead, and effectively improve the safety factor of motor vehicles.

Product structure of this system：

Traffic light control system：

Optional 48-way network or independent control, accept customer customization.

Road stud control system：

Modular design, each drive unit can drive at least 10 groups of light colors, using 24V DC power supply,

wireless transmission signal can be selected, can also choose the traditional wiring mode.

2. Traffic light

Name：JD3033LB 300mm full screen traffic light for motor vehicles
Product size：1124*348*130mm
Power：R≦8W；Y≦8W；G≦8W
LED quantity：red 168pcs，yellow 168pcs，green 168pcs
Operating temperature ：-40℃~80℃

Visual distance：≧800m

Standard：GB-14887-2011

Name：JD3033LB 300MM three-color arrow motor vehicle traffic light
Product size：1124*348*130mm
Power：R≦8W；Y≦8W；G≦8W
LED quantity：red 93pcs，yellow 93pcs，green 93pcs
Operating temperature ：-40℃~80℃
Visual distance：≧800m
Waterproof：IP54
Standard：GB-14887-2011

Name：JD3023LB 300MM Dynamic Pedestrian + Countdown Traffic Light
Product size：776*348*130mm
Power：R≦8W；G≦8W

Pedestrian lamp beads：red 80pcs，green 120pcs

Timing bead：red 64pcs，green 64pcs

Standard：GB-14887-2011

3.Intelligent zebra crossing road stud：

Through the spike control system, synchronizing the motor vehicle traffic light signal and pedestrian signal light signal,

it can realize the state of warning pedestrians to pay attention to the traffic signal light in advance when crossing the

zebra crossing, and reminding motor vehicles to warn the color change of the signal light 100 meters in advance and

pay attention to slow down through the intersection or the front side is blocked by large vehicles, through the

intelligent vehicle road lights to judge the state of the traffic signal lights.

LS-68 Smart zebra crosswalk spikes (solar or wiring styles are optional) :

Size：Dia145*5cm(5+44.5)

weight：1000g±30g

Material：Aluminum alloy+PC

Light source：two-color 5MM，

LED：red+green，single side 2PCS

Working input voltage：Charging by solar, America SUNPOWER solar panel: 0.5W 5.0V

Battery：3.2v 1500MAH Lithium iron phosphate battery

Communication protocol channel：433M

Installation line：drill bit at hole 152

Waterproof：IP68

High visibility, visible distance, more than 500 meters

Large luminous Angle, in line with the vehicle driver warning perspective.

Embedded buried design, the height of the ground is 5MM (LS-68),

anti-skid design, anti-sledge design (the height of the sledge is 10MM)

SunPower photovoltaic panels, charging conversion rate is high, up to more than 25%.

Strong compression resistance, LS-68 can resist 50 tons of pressure, 80KM/H of the impact of large trucks.

Low temperature resistance and high temperature resistance: -20℃~80℃

Long service life, up to more than three years.

Meet EU standard EN1463-3.

Easy to install, use 152MM diameter drill bit to open a hole about 5CM deep, with positioning design,

and then pour 2MM thickness of glue.

Easy maintenance, embedded design and full IP68 waterproof inner core, can not damage the ground,

can be removed to complete the replacement.

Real case：